Barley Straw Granulated Roof Tiles » Barley Straw Granulated Verge (Left)
£8.29 Excludes VAT
Our verge caps can be used to cover the exposed, pitched edge of a roof conversion. This ensures that water does not run under the tiles and finishes the roof off nicely. These verge caps are coloured in a textured barley straw.
Verge caps are available in two types (either left or right), you need to ensure you use the correct side of cap when fitting.
A single verge cap covers 0.94 linear meters, (so if you need 3 meters you should ideally buy 4). This approximately equates to one verge cap required for every three Lightweight Tiles.
Overall Length: 1110mm
Usable surface: 940mm
“ I installed this product over an existing asbestos cement garage roof so needed something light but robust as we have lots of rain and trees. Can I say this is a fantastic product which was easy to install as an amateur (after conquering my dislike for clambering on roofs) and the finished roof is transformational and all support timbers show no excessive load bearings.
I am extremely pleased with the product and would recommend these tiles very highly.”
- Vincent , Hindhead