Brown Granulated Roof Tiles » Brown Granulated Verge (Right)
£8.29 Excludes VAT
Our verge caps can be used to cover the exposed, pitched edge of a roof conversion. This ensures that water does not run under the tiles and finishes the roof off nicely. These verge caps are coloured in a textured brown.
Verge caps are available in two types (either left or right), you need to ensure you use the correct side of cap when fitting.
A single verge cap covers 0.94 linear meters, (so if you need 3 meters you should ideally buy 4). This approximately equates to one verge cap required for every three Lightweight Tiles.
Overall Length: 1110mm
Usable surface: 940mm
“ I just wanted to say how good your product was when I used it recently .
I took down an old wooden conservatory and replaced it with a brick one that had a wooden roof . The front of the conservatory roof sat on a wall plate on top of the French door frame and I didn’t want the weight of concrete tiles on top of that,so I researched and found your product.
The videos of how the product was made and installed and how durable they were was a deciding factor in me choosing yourself over other similar product I had seen.
I have to say the service from the lady who took the order to the prompt delivery was 1st class and friendly , and the price was a lot less than I had thought was going to be .
The product itself was top quality and installation was as simple as it could be with everything fitting together without any problems and the verge trims finished it off fantastically and all the people who have seen it have commented on how good it looks .
I have been a building site manager for 25 years plus so have a good idea of things and how they should work and I have to say I wouldn’t hesitate to recommend or use your product again.
So well done for developing such a great product and wishing your company every success in the future.
- Kevin , Hinckley