Black Budget Roof Tiles » Budget Black Ridge Tile
£4.40 Excludes VAT
These lightweight, ridge tiles are designed to cover the ridge of your roof conversion. One ridge tile covers 0.36 metres in length (so for 1 meter or one Lightweight Tile you will need 3 ridge tiles). These tiles are finished in a un-textured black colour and boast the following features:
Usable surface: 360mm
The ridge tiles are fixed to the ridge or hips of your Lightweight Roof with screws, either into a central batten or directly into the top of the tiles underneath. See our Installation Guidelines for more details.
“ We wanted a covered patio area and discovered the website. The tiles are light and were put up in just a few hours compared with a couple of days for concrete tiles. The infrastructure is a lot lighter and the whole project was completed far quicker than if we had used conventional tiles.
Result, very noticeable reduction in solar heating on sunny days, retains heat better when heated on cool days, and is much quieter, rain and road noise greatly reduced. Had a bit of a struggle with the Ubiflex, found it to be ‘floppier’ than traditional lead, more difficult to feed a long length into slot cut in mortar. Once in place, Ubiflex sealants worked well, and it was easy to mould the flashing to fit the tiles.”
- Richard Pitman , Worcester