Black Budget Roof Tiles » Budget Black Verge (Left)
£5.82 Excludes VAT
Our verge caps can be used to cover the exposed, pitched edge of a roof conversion. This ensures that water does not run under the tiles and finishes the roof off nicely. These verge caps are provided in a basic, un-textured black colour.
Verge caps are available in two types (either left or right), you need to ensure you use the correct type of cap when fitting.
A single verge cap covers 0.94 linear meters, (so if you need 3 meters you should ideally buy 4). This approximately equates to one verge cap required for every three Lightweight Tiles.
Overall Length: 1110mm
Usable surface: 940mm
“ We contacted Lightweight tiles to request information on the Product The staff we very helpful and we arranged a visit to inspect the product Having given them the sizes of the conservatory that we wanted to re roof, we received a quotation for all the product to do the job. We collected the product which was shrink wrapped very well Following the installation advice on the web site it took us just 15 hours to strip off the old roof and install the new one It was very east to cut and fit the tiles All finishing end strips fit very well Any competent DIY person can do this We would recommend the product to anyone wishing to roof or re-roof any building Special Thanks to all personal for their valued assistance all through the process.We even received a credit for the few tiles that we did not use.”
- Grenville S.