Black Budget Roof Tiles » Budget Black Verge (Right)
£5.82 Excludes VAT
Our verge caps can be used to cover the exposed, pitched edge of a roof conversion. This ensures that water does not run under the tiles and finishes the roof off nicely. These verge caps are provided in a basic, un-textured black colour.
Verge caps are available in two types (either left or right), you need to ensure you use the correct type of cap when fitting.
A single verge cap covers 0.94 linear meters, (so if you need 3 meters you should ideally buy 4). This approximately equates to one verge cap required for every three Lightweight Tiles.
Overall Length: 1110mm
Usable surface: 940mm
“ I had to increase the pitch as it was insufficient for water to run off of the tiles, I built a rise of additional 15 degrees onto the small pitch already on the triple walled roof. This was taking the front edge to rise to 200mm at the back, then flasbanded and bonded to the roof tile. The customer found that the conservatory wasn't useful to them before and this has made it into a additional room, with a bed settee as a guest room. The customer was absolutely thrilled with the transformation, and I was pleased with a trouble free installation. ”
- Mr Sharp , Morecambe