×

COVID-19 UPDATE

Due to the current situation, Lightweight Tiles are regrettably closing our factory on a temporary basis. New orders can still be made online but will not be dispatched until after the 20th April 2020 at the earliest.

Thank you for your support and if you have any urgent queries, please contact us on [email protected] 

Eaves Guard

£2.62  Excludes VAT

Our eaves guard system is designed to slot under our lightweight roofing tiles and into the guttering, ensuring rain water is taken away from the roof. Eaves guards can be used for both refurbishment projects and new build, to provide an effective level of eaves protection. The 1.5m rigid preformed strips are suitable for use in roof pitches of 15°... read more

We aim to dispatch this product within 28 days (depending on availability).

All our tiles come with a
25 Year Guarantee

Work out how many tiles you need for your roof conversion

Use Our Calculator

Our eaves guard system is designed to slot under our lightweight roofing tiles and into the guttering, ensuring rain water is taken away from the roof. Eaves guards can be used for both refurbishment projects and new build, to provide an effective level of eaves protection. The 1.5m rigid preformed strips are suitable for use in roof pitches of  15° to 70°. Eaves guard is suitable for pitched tile and slate roofs (as well as our own lightweight roofing system).  **Please note the eaves guards are cut in half for transportation reasons**  

  • Full Length: 1500mm
  • Width: 250mmEaves Guard Technical Drawing

 

 

We contacted Lightweight tiles to request information on the Product The staff we very helpful and we arranged a visit to inspect the product Having given them the sizes of the conservatory that we wanted to re roof, we received a quotation for all the product to do the job. We collected the product which was shrink wrapped very well Following the installation advice on the web site it took us just 15 hours to strip off the old roof and install the new one It was very east to cut and fit the tiles All finishing end strips fit very well Any competent DIY person can do this We would recommend the product to anyone wishing to roof or re-roof any building Special Thanks to all personal for their valued assistance all through the process.We even received a credit for the few tiles that we did not use.

- Grenville S.

Back to Top