Plastic coated screws - red

Brown Granulated Roof Tiles » Plastic coated screws - red

£3.75  Excludes VAT

We recommend using our plastic coated screws with any lightweight roofing installation. The coating means that the screw will be highly resistant to corrosion and also can be colour coded to match some of our ranges. These packets of screws are coated in a red plastic. read more

We aim to dispatch this product within 2 days (depending on availability).

All our tiles come with a
25 Year Guarantee

Work out how many tiles you need for your roof conversion

Use Our Calculator

We recommend using our plastic coated screws with any lightweight roofing installation. The coating means that the screw will be highly resistant to corrosion and also can be colour coded to match some of our ranges. These packets of screws are coated in a red plastic.

  • Pack contents: 40 x (4.0mm x 45mm) plastic coated screws.
  • Recommended Usage: Approximately 3 screws per roofing tile.
  • Colour: Red.

 Our screws are a Plastic coated galvanised Steel which means they wont rust in time.  They are also Counter Sunk type screw.  

This old building in our garden is known to us as the Ranch House. It is known to be at least 75 years old and may well be more. The roof in particular was falling apart, it was covered in corrugated bitumen sheeting which was well past its used by date. We had two choices; demolish it or renovate it. We decided to renovate but felt that it deserved something better than corrugated sheeting on the roof. This was why we selected Lightweight Tiles after several email exchanges with Laura and Susan plus going to meet Laura at the Renovation Show in Birmingham.

The hard part was completely rebuilding the roof structure as we decided to change the pitch of the roof. Fitting the tiles was easy. Two of us fitted 70 tiles on the long side in 5 hours which included a leisurely lunch and several cups of tea. I fitted the remaining 30 on the other side on my own in about the same time. I have one tip though, it is worth drilling a small pilot hole for each screw, you can then fit the screws much more neatly.

We are very pleased with the transformation, I keep going down the garden to look at it!

- Bob S , Cheltenham

Back to Top