Red Budget Roof Tiles » Budget Red Verge (Left)
£7.00 Excludes VAT
Our verge caps can be used to cover the exposed, pitched edge of a roof conversion. This ensures that water does not run under the tiles and finishes the roof off nicely. These verge caps are provided in a basic, un-textured red colour.
Verge caps are available in two types (either left or right), you need to ensure you use the correct type of cap when fitting.
A single verge cap covers 0.94 linear meters, (so if you need 3 meters you should ideally buy 4). This approximately equates to one verge cap required for every three Lightweight Tiles.
Overall Length: 1110mm
Usable surface: 940mm
“ This was the first time we had used these tiles. The delivery arrived as promised.The project was to re roof a lean-to extension. The whole job went very well,the tiles fitted easily and the job was completed in one weekend.
Next job is a double garage roof and again we will use Lightweight Tiles.”
- Sean B , Mitcham