Quality British made lightweight roofing tiles for DIY roofing or trade. Not only are our lightweight roofing tiles very light and strong, but they are also simple to fit on a wide range of roofs. Our lightweight tiles are easy to saw and cut and with just some batons, a drill, a screwdriver and a handful of screws, you can completely renew your roof in just a couple of hours.
We manufacture and distribute our own low pitch roofing products (recommended for roof pitches of 10º and above) to the highest standard, and pride ourselves on our attention to detail. Our recycled roofing tiles are made here in the UK by our family run business, and we have been producing and distributing our roofing system for many years throughout the UK and Europe.
Our lightweight roofing tiles are made from a mix of a top blended quality virgin polypropylene and recycled polypropylene, they can also be recycled, making them a brilliant, eco-friendly option. All our tiles are guaranteed for 25 years.
“ This is the transformation of my conservatory, which my wife and I are very happy with. We will definitely recommend you and are speaking highly of your product. Thank you very much. ”
- S. Nach... , Royston
“ After installation.
Quick to install,once I got started with following detailed instructions from the supplied leaflet.
Job done in approx 7.5 hours start to finish weather permitting, but weather was perfect on 5th June ”
- Mr Sanchania , Telford
“ Thanks Team,
I recently purchased your granulated brown tile sheets to finish off my porch project. The tiles were easy to work with and allowed me to create the effect of the roof being ‘tied in’. It is, in fact, cantilevered to within an inch of the original tiles!
”
- Malcolm Greener York
“ I have a general building and carpentry background, but I will say that your products are very easy to use and with a bit of forward planning, it was easier than I thought. I think I was quite fortunate how the tiles worked out at the ridge but would have been fine if I would have had to of cut them, as your ridge tile gives great cover.
The room was once a separate conservatory, but as with a lot of households now, I had knocked out the back of the house and the wall of the kitchen to make one big entertainment area. The roof was then the biggest loss of heat in the winter. 25mm Celotex insulation was just stuck onto the outside face of the existing polycarb roof, between the roof bars and then felt and battened. As for the Velux, the interaction with your tiles, as opposed to a ‘normal’ traditional tile, was a little interesting. Your tile sits below the front edge of the battens and ‘normal’ tile hooks over the back of it meaning the tile line does rise a little at this point to accommodate the flashing kit but is not too noticeable.
The beauty of doing it this way, was the fact that the existing roof gave great weather proofing. As I never compromised it, apart from taking out the existing vent openers.
I intend now to stick another layer of 25mm Celotex in-between the roof bars on the inside and then plasterboard and skim to give it a vaulted ceiling look. I will send you a picture of this, if you wish, later in the year. ”
- Mike Palmer Palmer Property Maintenance, Bristol
Installation Tip Videos for Our Lightweight Roof Tiles
Take a look at some of our YouTube Installation Tip Videos. . .
View our Customers' Completed Roof Catalogues
Click on the Image to Take a look at a small selection of Granulated Roofs…
We have recently been having our granulated and smooth lightweight roofing …
How to do a conservatory roof conversion
As a manufacturer and supplier of Lightweight Tiles, which are brilliant fo…
“ I thought you would like to know that I am extremely satisfied with your product. My two sons fitted this in 5 hours including striping off the old battens and felt. If you want to use the photo as a job finished please feel free to do so. ”
- Adrian