Quality British made lightweight roofing tiles for DIY roofing or trade. Not only are our lightweight roofing tiles very light and strong, but they are also simple to fit on a wide range of roofs. Our lightweight tiles are easy to saw and cut and with just some batons, a drill, a screwdriver and a handful of screws, you can completely renew your roof in just a couple of hours.
We manufacture and distribute our own low pitch roofing products (recommended for roof pitches of 10º and above) to the highest standard, and pride ourselves on our attention to detail. Our recycled roofing tiles are made here in the UK by our family run business, and we have been producing and distributing our roofing system for many years throughout the UK and Europe.
Our lightweight roofing tiles are made from a mix of a top blended quality virgin polypropylene and recycled polypropylene, they can also be recycled, making them a brilliant, eco-friendly option. All our tiles are guaranteed for 25 years.
“ Good morning. Please find attached photos as promised. Prior to retailing the conservatory roof I insulated, boarded and plastered the inside. After completing the roof the transformation is amazing. Thank you very much for a superb product and the help and advice given by your staff. Everyone who has seen the new roof are very complimentary on the finish and new look. I would have no hesitation in recommending your company to anyone. ”
- Ian Gaunt , Cleethorpes
“ We wanted a covered patio area and discovered the website. The tiles are light and were put up in just a few hours compared with a couple of days for concrete tiles. The infrastructure is a lot lighter and the whole project was completed far quicker than if we had used conventional tiles.
Result, very noticeable reduction in solar heating on sunny days, retains heat better when heated on cool days, and is much quieter, rain and road noise greatly reduced. Had a bit of a struggle with the Ubiflex, found it to be ‘floppier’ than traditional lead, more difficult to feed a long length into slot cut in mortar. Once in place, Ubiflex sealants worked well, and it was easy to mould the flashing to fit the tiles. ”
- Richard Pitman , Worcester
“ Hi, please see photos of the transformation of my garage, using lightweight tiles. My house was built in the 1930s, when the building standards were not as stringent as today’s. The garage was literally in a state of collapse, due to the sheer weight of the roof, spreading the walls apart.
I discovered your product online and it was the perfect answer to the problem.
I didn’t employ a bricklayer; my brother-in-law and I carried out all the work and I’m extremely happy with the result.
The reduction in weight, compared to conventional tile, solves the problem of the walls being put under stress and I’m sure that the new roof will last for a long time to come.
The service that I got from your company was amazing, especially so, as we were in the middle of the Pandemic. I particularly want to thank Susan, for super customer service, when so many companies seem unable to function normally, due to the Pandemic. ”
- Bill , Greater Manchester
“ Thank you for all your help. I’ve put a photo below, of the completed work. ”
- T Grant , Liverpool
Installation Tip Videos for Our Lightweight Roof Tiles
Take a look at some of our YouTube Installation Tip Videos. . .
View our Customers' Completed Roof Catalogues
Click on the Image to Take a look at a small selection of Granulated Roofs…
We have recently been having our granulated and smooth lightweight roofing …
How to do a conservatory roof conversion
As a manufacturer and supplier of Lightweight Tiles, which are brilliant fo…
“ After finishing the shed roof, I of course had some offcuts and spare tiles.
Working 5 days per week, so has been a Sunday afternoon project over the past 2 months, but so far, one Bird Table (or Cat Entertainment Center) for the front garden and an all weather Cat Pagoda for the back garden. ”
- James , Sheffield