Quality British made lightweight roofing tiles for DIY roofing or trade. Not only are our lightweight roofing tiles very light and strong, but they are also simple to fit on a wide range of roofs. Our lightweight tiles are easy to saw and cut and with just some batons, a drill, a screwdriver and a handful of screws, you can completely renew your roof in just a couple of hours.
We manufacture and distribute our own low pitch roofing products (recommended for roof pitches of 10º and above) to the highest standard, and pride ourselves on our attention to detail. Our recycled roofing tiles are made here in the UK by our family run business, and we have been producing and distributing our roofing system for many years throughout the UK and Europe.
Our lightweight roofing tiles are made from a mix of a top blended quality virgin polypropylene and recycled polypropylene, they can also be recycled, making them a brilliant, eco-friendly option. All our tiles are guaranteed for 25 years.
“ We contacted Lightweight tiles to request information on the Product The staff we very helpful and we arranged a visit to inspect the product Having given them the sizes of the conservatory that we wanted to re roof, we received a quotation for all the product to do the job. We collected the product which was shrink wrapped very well Following the installation advice on the web site it took us just 15 hours to strip off the old roof and install the new one It was very east to cut and fit the tiles All finishing end strips fit very well Any competent DIY person can do this We would recommend the product to anyone wishing to roof or re-roof any building Special Thanks to all personal for their valued assistance all through the process.We even received a credit for the few tiles that we did not use. ”
- Grenville S.
“ 10 out of 10... ”
- Tony , Pontefract
“ First of all thank you for your service and a fantastic product as you can see from my pictures I only wanted them for my gazebo wish I would have had a square one obviously not a professional job and I used the upside down tiles for my ridge but I am thrilled to bits with the outcome ”
- Garry , Manchester
“ They look good and so far have resisted all the elements including torrential rain and and gale force winds. We are delighted with the results. And many thanks to Bruce for his very helpful advice and guidance. ”
- Alan Swinscoe , Wigan
Installation Tip Videos for Our Lightweight Roof Tiles
Take a look at some of our YouTube Installation Tip Videos. . .
View our Customers' Completed Roof Catalogues
Click on the Image to Take a look at a small selection of Granulated Roofs…
We have recently been having our granulated and smooth lightweight roofing …
How to do a conservatory roof conversion
As a manufacturer and supplier of Lightweight Tiles, which are brilliant fo…
“ I had to increase the pitch as it was insufficient for water to run off of the tiles, I built a rise of additional 15 degrees onto the small pitch already on the triple walled roof. This was taking the front edge to rise to 200mm at the back, then flasbanded and bonded to the roof tile. The customer found that the conservatory wasn't useful to them before and this has made it into a additional room, with a bed settee as a guest room. The customer was absolutely thrilled with the transformation, and I was pleased with a trouble free installation. ”
- Mr Sharp , Morecambe